| Footprint size, weight | 2300mm x 700mm about 723Kg |
| Applicable warp | AWG#18 ~ #22 or AWG#24 ~ #28 |
| Feeding mode | Vibrating disk feed |
| Wire feed mode | Wheel feed |
| Peeling method | Reverse screw |
| Stripping length | The first side is 1.0mm to 8mm, and the second side is 1.0mm to 10mm |
| Holding capacity | 1.5T servo terminal |
| Crimping terminal | JAM, OPT, JST, Molex cross feed terminals (JST, Molex need to replace the clamping plate and punch) |
Suitable for rubber seat dimensions | 58W x 20D x 15H |
| capacity | Twisted wire + Tin-stained 2.7sec/ piece (when the wire is cut within 50mm) |
| Handling mode | Servo motor trolley operation, a total of two trolley clips, high position accuracy |
| Assembly mode | Sequential assembly, cross assembly |
| Line length | 30mm ~ 1000mm(long line needs to be equipped with conveyor belt) |
| Quality inspection function | Copper core end face visual detection, terminal appearance visual detection, terminal detection, assembly in place detection, wire stripping detection, wire detection, pressure too small detection |
| Operating station | Six stations + two carts |
| Air pressure requirement | 0.5 to 0.7MPa |
| Power interface | 220V |
| The number of shafts of the feed rack | 8-axis |
0086 13549921807
